NTools VC 50E/EP is the latest mobile dust extraction system available as automated electrical system and automated electrical-pneumatic system. These systems ensure extraction of dusts during works related to sanding in body & paint shops and other works delivered with power or air driven tools. It finds application in furniture or construction industry during sanding milling, cutting and wet drilling (without use of paper bags).

Two operation modes are available: manual and automatic. When in automatic mode the system turns on immediately upon activation of the tool and turns off after work finish at delay of 3 to 5 sec. Power socket on the top panel provides power to any power tool with EC plug and 2000W max output. Whereas air quick fit coupling is compatible with Rectus 26/DN7.2 type air adapters.

Systems are provided with stainless steel tanks seated on plastic support provided with robust rubber casters (two rear non-steerable of 15cm dia. and two steerable top ones of 6.5cm dia.)

£164.00

NTools VC 50E/EP is the latest mobile dust extraction system available as automated electrical system and automated electrical-pneumatic system. These systems ensure extraction of dusts during works related to sanding in body & paint shops and other works delivered with power or air driven tools. It finds application in furniture or construction industry during sanding milling, cutting and wet drilling (without use of paper bags).

Two operation modes are available: manual and automatic. When in automatic mode the system turns on immediately upon activation of the tool and turns off after work finish at delay of 3 to 5 sec. Power socket on the top panel provides power to any power tool with EC plug and 2000W max output. Whereas air quick fit coupling is compatible with Rectus 26/DN7.2 type air adapters.

Systems are provided with stainless steel tanks seated on plastic support provided with robust rubber casters (two rear non-steerable of 15cm dia. and two steerable top ones of 6.5cm dia.)

£164.00

Set of accessories 5-in-1 for NTools VC50E/EP extraction system delivered in a zipped bag.

SET INCLUDES:
1) Hose along with handle (150cm)
2) Tubes (1 items x 44cm)
3) Floor brush
4) Crevice tool
5) Round brush with synthetic bristle
+ Zipped bag

£163.00

The flexible rubber tip for a 29 mm suction hose fits into the suction hoses for the NTools VC 50E / EP and Rupes suction extractors. It allows you to connect electric and pneumatic tools of the Rupes and Indasa brands equipped with a suction function.

£163.00

NTools FM 50 is a reusable fabric filter for the NTools VC 50E and NTools VC 50EP extractor, which protects their motors against dust and damage. The NTools FM 50 fabric filter together with the dust paper bag creates a double filtration system that prevents the dust sucked into the suction tank from entering the engine compartment. The material filter together with the steel wire stiffener is reusable.

£163.00

A professional paper filter bag for dust and other contaminants that matches the NTools VC 50E / EP and NTools VC 36E / EP dust extractor models. It can also be used as a replacement for extractor: RUPES from series: S130, S145, SP235, KS260, KX130 / INDASA from series: LE30 and LPE45.

£163.00

Hose 2-in-1 with pneumatics, 5m long, 29mm inner dia. and 35mm outer dia., purposed for use with dust extractions systems NTools VC 50EP and Rupes S130PL, S145EPL, KS260EPNS, S235EP.

Hose is provided with integrated air tube along with quick fit coupling and plug as well as rubber ends for plugging to pneumatic extraction systems.

£163.00

NTools W0E 5 is 5m long hose of 29mm inner dia. and 35mm outer dia., purposed for use with electric dust extractions systems NTools VC 50E and Rupes S130L, S145EL, KS260EN, S235E.

Hose is provided with rubber ends for plugging to grinders and other tools adapted to extraction systems.

£163.00

NTools TR125U/G and NTools150U/G dia. 125mm and 150mm, 15mm and 18mm thick with replaceable fixing bolts, 5/16” thread or M8. Purposed for eccentric sanders and grinders. Made from soft Polyurethane (PU) foam resistant to deformation, provided with holes for dust extraction and ventilation.

ADVANTAGES:
– Holes configuration that ensures for ventilation and heat  reduction during long-time work;
– Resistant to damage flexible Polyurethane foam that ensures long service life of disk and precision during work;
– Two 5/16” threaded and M8 bolts compatible with widely used eccentric sanders and power grinders.

£161.00

NTools TR125U/G and NTools150U/G dia. 125mm and 150mm, 15mm and 18mm thick with replaceable fixing bolts, 5/16” thread or M8. Purposed for eccentric sanders and grinders. Made from soft Polyurethane (PU) foam resistant to deformation, provided with holes for dust extraction and ventilation.

ADVANTAGES:
– Holes configuration that ensures for ventilation and heat reduction during long-time work;
– Resistant to damage flexible Polyurethane foam that ensures long service life of disk and precision during work;
– Two 5/16” threaded and M8 bolts compatible with widely used eccentric sanders and power grinders.

£161.00

A universal board intended for working with sanding discs in the NTools / APP series is an effective tool for organizing and arranging your work at the workshop.

Made from steel, the board may serve as a handy storage for sanding discs (whole boxes), as well as a hanger for individual discs without boxes. The board features 9 spaces for mounting discs, enabling to distinguish the most popular sand paper gradations in the given workshop. This allows to easily control the wear rate of sanding discs.

The board is additionally equipped with a powder coated steel handle used to mount 3 pneumatic sanders with the most popular on the disc diameter on the market of 150 mm. The handle may additionally be attached to the 40HMFTAB modular board or directly to the wall using wall plugs and screws.

The functional board is available in a version to hang on the workshop wall. The board comes with an instruction manual and accessories essential to mounting the board and the handle (screws, wall plugs, disc mounts).

£141.00

A universal board intended for working with sanding discs in the NTools / APP series is an effective tool for organizing and arranging your work at the workshop.

Made from steel, the board may serve as a handy storage for sanding discs (whole boxes), as well as a hanger for individual discs without boxes. The board features 9 spaces for mounting discs, enabling to distinguish the most popular sand paper gradations in the given workshop. This allows to easily control the wear rate of sanding discs.

The board is additionally equipped with a powder coated steel handle used to mount 3 pneumatic sanders with the most popular on the disc diameter on the market of 150 mm. The handle may additionally be attached to the 40HMFTAB modular board or directly to the wall using wall plugs and screws.

The functional board is available in a version to hang on the workshop wall. The board comes with an instruction manual and accessories essential to mounting the board and the handle (screws, wall plugs, disc mounts).

£140.00